Copper Tube Condenser Coil

Application:

Chemical Gas Condensation

Commercial and Industrial Referigeration

Energy Recovy System​

Polluted Gas Recovery Systems

Coolant condenser coils are used to transfer heat from the coolant to the desired heat source, whether this is interior, in the case of a heat pump, or exterior, in the case of air conditioning. Whether your application requires just one coolant circuit, a secondary integrated refrigerator or multiple fin spacings, FRICOLD can design and build the precise condenser coil for your application.

The equipment is specially designed to comply with your exact engineering requirements, but we also know that time-critical projects may require quick changes. Our accelerated production programme enables us to offer shipments of evaporator coils in a short time period.

Advantages

• Design software: Using the mature European design software, according to the actual demand accurate design of heat exchanger, can design the latest refrigerant CO2,R410A, R507A and special low temperature cold agent etc.
• Heat exchange structure: Supported to the casing by means of a "flating-bed " system that avoids any kind of contact between the heat-exchange tubes and the supporting end plates,assuring a long life for the heat-exchange without leaks. Heat-exchange sections separated and independent for each fan. The standard fin spacing is 2.1mm,Fin pitch up to 12mm for low air pressure drop.
• Condenser structure: Shape with flexible and changeable,--Flat-bed,W-Bank,V-Bank; Fan direction--blowing and sucking. Finned length up to 12m,Finned height up to 2.7m.
• Heat Exchange Tube: Using copper content more than 99.9% of special effective teeth threaded pipe, increase the surface area of the tube, improve the thermal efficiency.
• Casing: Using galvanized sheet case, spraying outdoor powder coatings, and after high temperature curing, high strength of corrosion resistance is strong, the standard color for RAL9003.
• Fans: Low noise axial fans,with maintenance free motors in protection class IP 54,Internal motor protection with thermo contacts.With precise design, a leading solar or lunar halo forming mould processing, air volume is larger and more efficient.

OEM Options

Work Shop Gallary

Please be free to contact us if you need any further information, thank you!

ADV Heat Exchanger Co.,Ltd, located in Changzhou, Jiangsu Province, China, is a professional customized manufacturer for various cooling solutions for Machinery, Electronic, Hydraulic & Lubricant System, Compressed Air & Gas, New Generation, Automotive and Various Industry Applications …

We design, test and manufacture wide ranges of brazed aluminum coolers, copper and brass tube coolers, plate coolers, stainless steel coolers for Oil, Air (compressed and charged air) and Water/Glycol mixtures, according to the special application requirements.

Advantage, Development ,Value is our mission and which we can always offer to our customers.